Deep Cleaning as provided by Flagg Incorporated is a comprehensive cleaning of the plant or industrial facility from ceiling to floor with special emphasis on paint shops to eliminate dirt sources. The Deep Cleaning Process is used for ceilings, structural beams, piping, walls, floors and process equipment. Deep Cleaning can be accomplished by either Wet or Dry Cleaning. Wet Cleaning utilizes mild detergents sprayed at low pressures to loosen dirt. A low volume of high pressure water is then used to rinse the surfaces clean. Prior to the wet cleaning process, all necessary equipment is covered and protected.
Dry Cleaning is accomplished by using a vacuuming procedure to remove large build-ups and hand wiping with lint free tac cloth to finesse clean the areas. The area to be dry cleaned will be sealed off with visqueen or similar material to prevent particulate that might become airborne from the dry cleaning process.
In most cases, Deep Cleaning is a combination of both wet cleaning and dry cleaning. Flagg Incorporated is knowledgeable and experienced and we are ready to handle your deep cleaning project with care and efficiency. |